This client in the town of Louth near Horncastle had two tiled floors that were in need of attention. The first was an old Victorian tiled hallway and the second a Quarry tiled room, both had paint, plaster, adhesive and concrete on them but the Quarry tiles were in the worst condition. Hopefully the photographs below give you a good idea of the condition which would require a really deep clean and in some areas re-grouting.
Cleaning Victorian and Quarry Tiled Floors
We applied pro clean to the floors and allowed to work into the tiles before using our buffer system to scrub the tiles with a black pad. Then we extract and rinse the dirty solution off the tiles into our wet vacuum system. We repeated this process till the paint and plaster had been removed.
As usual I began the job using a strong solution of Tile Doctor Pro-Clean which was left to soak into the tiles before being scrubbed in with a black pad fitted to a rotary machine. The resultant soiled solution was extracted off into our wet vacuum system and the process repeated until the paint and plaster had been removed.
To treat the concrete and adhesive I used two other products called Tile Doctor Remove and Go and Grout Clean-Up. Again these products slowly dissolve the stains and concrete making it easier to scrub them from the surface. After several cleans the floors were thoroughly rinsed and then left to dry with some assistance from our turbo dryer system to speed up the drying process.
Sealing Victorian and Quarry Tiled Floors
We left for a few days so the floors could dry out and on our return tested the tiles with our moisture meter which showed the floor was still to damp to seal so it was necessary to leave the floors for a few more days until they were bone dry.
On our return we sealed the floors with a new product in the Tile Doctor range called Seal and Go Extra which due to its highly breathable nature works very well on external tiles or older floors where there may be a damp problem. As with the original Seal and Go it leaves a subtle shine on the tile which suited the requirements of the customer who incidentally was happy with the transformation and is happy to recommend our services.
Victorian and Quarry Tiled Floors Cleaned and Sealed in Lincolnshire
This customer from Louth had a very dirtyLimestone tiled floor with some cracks evident installed throughout the kitchen, hallway and conservatory. It was dull and not looking it’s best so she had asked several companies in the local area to quote but they did not feel able to help. Fortunately she discovered Tile Doctor and gave us a call, naturally this sort of work is well within our ability so not only were we able to help restore the appearance but also repair the cracks at the same time.
Burnishing Limestone Tiles
To resolve the surface cracks and remove the dirt from the floor we used a set of diamond encrusted burnishing pads which incidentally are a very environmentally friendly system which only requires water. The pads come is a setup of four and you start with the coarse pad which fitted to a buffing machine running on slow speed, the coarse pad removes old sealers and then you move onto the medium, fine and very fine pads until the Limestone is cleaned and polished again. The floor was washed down with clean water at this point to remove the soil generated by the burnishing process and left to dry overnight assisted by a turbo dryer.
Limestone Tile Sealing
The next day the floor had dried and we applied two coats of Tile Doctor Colour Grow sealer to the tiles, the sealer fills the pores of the stone making it water and resistant and will protect it from stains in the years to come, this particular sealer also lifts the natural colours in the stone.
The client was delighted with the results as she had nearly given up on having a nice looking floor, see feedback below which was left on our automated feedback system.
I am very pleased with the work which was completed yesterday. From my first enquiry to the completed work was excellent, Mrs V Pedder, Tetney
Limestone Tiled Floor resurfaced and polished in Louth
These photographs are of a the Travertine tiled floor installed in a conservatory at a house in the historic town of Louth in Lincolnshire. The travertine was starting to dull and the grout was in need of a good clean so we were asked to maintain it.
Cleaning Travertine Tiles
Hard stone tiles such as Travertine and Marble etc. need to be polished with a set of Burnishing pads however before you start that process it’s necessary to remove any surface dirt from the floor first, this will ensure any grit that could get trapped in the burnishing pads and scratch the floor is removed first. With this in mind we washed the floor using a mild dilution of Tile Doctor Pro-Clean, this was also a good opportunity to get a stiff brush into the grout lines and give them a good scrub. We washed the floor down with clean water using a wet vacuum to remove the water from the floor before moving onto the next step.
Polishing and Sealing Travertine Floor Tiles
The floor was then re-polished using a set of 17” Burnishing pads fitted to our weighted polishing machine; the pads are diamond encrusted and you start with the coarser Red pad designed to remove sealers before moving on to the White, Yellow and finally Green polishing pad to achieve a high shine finish.
The last step was to seal the floor which we did using two coats of Tile Doctor Colour Grow which is colour intensifying sealer that will provide on-going durable surface protection as well as enhancing the natural colours in the Travertine tile.
The last photograph shows the effectiveness of the sealer on the surface of the tile, without a sealer the water would have soaked into the travertine, with a sealer it bubbles on the surface allowing spillages to be removed easily before they have chance to stain the stone.
Cleaning, Polishing and Sealing Travertine in Lincolnshire