Restoring a Victorian Tiled Bathroom in Horncastle

The owner of this Victorian tiled bathroom floor in Horncastle had tried scrubbing and scraping these tiles will little to show for it, in the end after spending hours on this cold floor and trying lots of different products he was fed up and it still looked less than satisfactory. The tiles were very old and dirty and had remnants of glue stuck around the edges indicating they had previously been covered by something else such as lino, fortunately Victorian tiles are our bread and butter and we have managed to restore tiles in a much worse state than this.

Victorian tiled floor near Horncastle before Cleaning3 Victorian tiled floor near Horncastle before Cleaning2

Cleaning Victorian Tiles

We set about cleaning the tile using Tile Doctor Remove and Go which is a strong coatings remover which is ideal for removing old sealers and adhesive products. It was left it to dwell on the floor for a while in order to give it chance to soak into the tile and get to work on the glue before being agitated using a rotary machine fitted with a black scrubbing pad. The soiled solution was then removed using a wet vacuum and the floor given a good rinse with clean water again using the wet vacuum to get the floor dry. This process tackled the glue but the tiles were still in need of a good clean so Tile Doctor Pro-Clean which is a strong alkaline cleaning product safe to use on tile and stone was applied; this was left to dwell and then scrubbed into the tiles to get a really deep clean, stiff brushes were used along the grout lines to get them clean as well and then the floor was given a thorough rinse to neutralise the tile and remove any trace of cleaning products.

Sealing Victorian Tiles

The next step was to seal the floor, however the tiles need to be dry before you can do this so we got our Turbo drying system out of the van, switched it on and it soon had the floor dry. Four coats of Tile Doctor Seal and Go were applied to the floor allowing twenty minutes to dry between coats; this particular sealer is recommended for Victorian tiles and does a great job of adding a nice sheen to the floor as well as adding stain protection.

Victorian tiled floor near Horncastle after Cleaning2 Victorian tiled floor near Horncastle after Cleaning1

We managed to complete the work in a single day and the owner was absolutely delighted by the results.

Deep Cleaning Victorian Tiles in Lincolnshire

Victorian Floor Tile Restoration in Lincoln

We asked to restore a hallway of very dull Victorian floor tile at a house in Lincoln. The customer had already called in another company and paid to have the floor acid cleaned and then sealed with a type of polish, you can see from the before photograph below the results were not very satisfactory and did not achieve the finish the client wanted.

Victorian Floor Before Cleaning

Victorian Tile Cleaning

Adding a new sealer on top of an existing product simply wouldn’t work and so we had to remove the old sealer first, this we managed to do with a strong 2 to 1 dilution of Tile Doctor Pro-Clean with water (2 Parts water); it’s a flexible yet effective alkaline product that can be used for stripping sealers, degreasing as well as cleaning.

Victorian Floor Tile Sealing

To seal the Victorian Floor tile we recommend Tile Doctor Seal and Go, it’s a breathable water based product which gave a much deeper shine to the tiles; also being water based it doesn’t give off any chemicals vapours and so it’s much nicer to work with. Victorian Tiles usually require around 4 to 5 coats, so it can take time to apply as you need to wait for it to dry before applying the next coat.

Victorian Floor After Cleaning and Sealing

The client was delighted with the results and has in fact booked us in to re-do their Quarry tile floors which they were happy with previously until they realised the results possible from our Tile Doctor Sealer.

Restoration of Victorian floor tile in Lincoln