sealing quarry tiles

Great set of photographs here for a client in Boston this time in an old Public House. The floors were made up of stone and quarry tiles and looked to be over 100 years old, there was no evidence of a sealer being applied and they were in need of a good clean.

Cleaning Quarry Tile Flooring

To start the Quarry tile cleaning we set about giving the floor a good scrub using Tile Doctor Pro-Clean and a rotary machine fitted with a buffing pad. We find machines can take a lot of the work out of the job but can only do so much, to reach those tricky corners you have to get down on your hands and knees with a scrubbing brush and add a bit of elbow grease. We worked at it for much of the day finishing by washing the floor down with clean water to remove any remaining chemical and neutralise the floor ready for sealing.

Sealing the floor with a Quarry Tile Sealant

We let the floor dry overnight and came back the next day to apply the sealer. For this we used Tile Doctor Seal and Go which is ideal for older Quarry Tile floors which were probably laid without any form of damp proofing, the sealer is water based and as well as bringing out the colour in the tile and providing protection it allows the transmission of moisture vapour up though the floor.

The Quarry Tile floor required 4 coats of Seal and Go to get the job done, we find it always best to do a water test to discover if the right amount of sealer has been applied as too much will lead to the floor going sticky. To do this you wait for the sealer to dry and add a drop of water to the top of the tile, if the drop sits on top of the tile in a bubble then enough sealer has been applied.

Needless to say the customer was delighted with the results and the pub is now open for business.

Cleaning Quarry Tile at a Public House in Boston